VDO Atomic Dot WRM

High power warm white beam (2700K)

SRP £420.00 + VAT

The Martin VDO Atomic Dot WRM hybridlighting and video fixtures combine a small blinder, compact strobe, video-pixel and small spotlight. By combining a video-controlled Aura backlightand a bright blinder/strobe dot in one fixture, lighting designers are empowered with greater creative potential to make a bigger impact with audiences than ever before. The fixtures' compact design also gives designers the ability to place VDO Atomic Dots just about anywhere and deploy them in larger quantities. Integrated support for P3, DMX, Art-Net and sACN eliminates the need for additional interface boxes and onboard P3 eases pixel mapping and using the product as a video controlled blinder or strobe.VDO Atomic Dots are ideal for rental customersand lighting designers working in concert/touringand TV show sets as well as supporting corporateand nightclub clients.

DUAL LAYER FIXTURE

A high-power, warm (WRM) or cold (CLD) white beam combined with a pixel-controllable RGB Aura backlight enables truly, unique effects. Both layers can be controlled individually via P3, DMX, Art-Net, sACNor a mix.

COMPACT AND LIGHTWEIGHT

Packs a lot of punch from a very compact fixture that can be used and hidden in any application. Internal power supply and IP65-rated housing increase usability of this fixture in various applications.

EASILY COMBINE MULTIPLE FIXTURES IN ARRAYS

The smart interlocking mechanics allow fixtures to be combined into battens, arrays or creative shapes. Creative imagination is your only limit.

HYBRID DATA AND POWER CABLE

The hybrid power and data cable carries all power and data for the fixtures, allowing them to be daisy-chained very easily in large quantities.

FRONT-ACCESSORY HOLDER

The industry-standard PAR30-sized front-accessory holder can holda diffuser to widen the beam-angle of the fixture. It also fits standard barndoors to give the fixture an artistic look on stage.

  • High power warm white beam (2700K)
  • Beam angle of 11 degrees
  • Field angle of 22 degrees
  • Pixel-controllable RGB Aura backlight
  • Compact form-factor
  • Built-in power supply (100-240V)
  • Power and Data IN & THRU via hybrid cable
  • P3, DMX, Art-Net & sACN compatible
  • Built-in pixel-FX on backlight and beam
  • Front-accessory holder for barndoors and/or diffuser/lens
  • Detachable yoke-assembly
  • Smart interlocking mechanics to build battens, arrays and creative shapes
  • Passive cooling
  • IP65-rated

Image title

Image title

Image title

Image title

Image title

Image title


PHYSICAL FIXTURE
Width175 (incl. hanging bracket) (150mm fixture center-to-center using interlock couplers)
Height138mm (150mm fixture center-to-center using interlock couplers)
Depth146mm
Weight2.2 kg
PHYSICAL PDE JUNCTION BOX
Width94mm
Height50mm
Depth106mm
Weight0.5 kg
DYNAMIC EFFECTS
Strobe0.289 – 16.667Hz, variable flash rate, intensity and duration (incl. blinder mode)
AuraRGB control per pixel
Built-in FXVarious pre-programmed FX on Strobe, Aura and combination of both
CONTROL AND PROGRAMMING
Control ProtocolsDMX, RDM, Art-Net, sACN and P3
Protocol DetectionAutomatic
DMX Channels1, 3, 4, 19, 64
Setting and AddressingRDM or P3
Fixture identificationUser-settable ID number
DMX ComplianceUSITT DMX512-A
RDM ComplianceANSI/ESTA E1.20
Art-Net ComplianceArt-Net 1, 2, 3 and 4; including RDM over Art-Net
sACN ComplianceANSI E1.31
Martin P3 ComplianceP3 System Controller Software 5.1.0 or newer
DMX/RDM TransceiverRS-485
Ethernet Transceiver10/100Mbit
Firmware Updatevia DMX using Martin Companion or via Ethernet using P3 System Controller
P3 VIDEO PROCESSING
Color Resolution16 bit per color (48 bit per pixel)
Color Temperature Control2000-11000 K (Aura)
Color Gamut Controlfull spectrum control (Aura)
Synchronizationsystem-wide
Frame Rateup to 75 frames/sec
Brightness Control0-100% (maintaining full color depth)
Gamma Correction and Controlfully controllable
CONTROL/USER INTERFACE
Device StatusMulti-color status LED
Device test and resetPushbutton to call up local test patterns and reset device
OPTICS AND PHOTOMETRIC DATA
Beam/Strobe LED
Max. total lumen output3000 lumens
Beam Angle11 Degrees (half peak)
Field Angle22 Degrees (one-tenth peak)
Color Temperature2700 K
Resolution16-bit
Minimum LED lifetime50 000 hours
Aura Backlight LEDs
Color Temperaturevariable
Resolution16-bit per color per pixel
Minimum LED lifetime50 000 hours
CONSTRUCTION
ColorBlack
Housing MaterialAluminum
Protection RatingIP 65
RoHSCompliant
REACHCompliant
INSTALLATION
Mounting Optionshanging from bracket, hanging from clamp attached directly to fixture or hanging from other fixture using interlock mechanism
Clamp attachment to hanging bracketM12
Clamp attachment directly to fixtureM8
Maximum vertical column height16 fixtures
OrientationAny
Minimum distance to combustible materials0.1 m
Minimum distance to illuminated surfaces0.2 m
Locationindoor or temporary outdoor use
CONNECTIONS
VDO Atomic Dot Fixture
AC Power, DMX and Network inputcable tail with PDE hybrid connector (IP65)
AC Power, DMX and Network thruchassis-mount PDE hybrid connector (IP65)
* All connections hot plugging compatible
PDE Junction Box
AC Power inputNeutrik powerCON TRUE1 TOP (IP65 when mated with matching Neutrik cable connector)
DMX inputNeutrik XLR 5-pin Male TOP (IP65 when mated with matching Neutrik cable connector) (compatible with standard 5-pin XLR connectors)
Ethernet inputNeutrik etherCON TOP (IP65 when mated with matching Neutrik cable connector) (compatible with standard etherCON Cat 5E and Cat 6A) (NOT compatible with etherCON Cat 6 push-pull)
AC Power, DMX and Network thruchassis-mount PDE hybrid connector (IP65)
* All connections hot plugging compatible
ELECTRICAL
AC power100-240 V AC nominal, 50/60Hz
Power Supply UnitAuto-ranging electronic switch mode
Maximum power consumption55 W
Typical half-cycle RMS inrush current1.12 A
Typical earth-leakage current0.25 mA
TYPICAL POWER AND CURRENT
100V, 60Hz: 49.0 W, 0.49 A, PF 0.99
120V, 60Hz: 48.9 W, 0.41 A, PF 0.98
208V, 60Hz: 48.6 W, 0.24 A, PF 0.95
230V, 50Hz: 50.2 W, 0.23 A, PF 0.96
240V, 50Hz: 49.6 W, 0.22 A, PF 0.94
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
PF = power factor.
THERMAL
CoolingConvection
Maximum Ambient Temperature (Ta max)40 C
Minimum Ambient Temperature (Ta min)0 C
Typical Heat Dissipation (calculated, +/- 10%)171 BTU/hr