THRILL Vertical Fogger

SRP £315.83 + VAT

THRILL Vertical Fogger is an atmospheric fog machine that features built-in LED lights capable of producing high velocity 7 m (25 ft.) high plumes of colored fog that simulate pyrotechnical effects, CO² style jets, or “cryo” white dense cloud effects.  

Fire this machine up and your party, show, event or business presentation is bound to draw attention. Get maximum attention when you instantly fill the room with a hefty blast of fog, light and simulated jet noise.  With 21 bright R/G/B LEDs, the THRILL Vertical Fogger offers virtually limitless color mixing. Beyond just lights and fog, the nozzle is designed to produce a boisterous noise simulating a natural fissure in the earth—creating an astonishingly real “volcanic” effect. And you can link multiple units for even bigger impact. Control is simplified with the included 4-channel wireless remote control or via DMX for more advanced users.

THRILL Vertical Fogger adds a dramatic flair to any band performance or DJ/club setup, and makes an unforgettable impression during product presentations, sports team entrances or other ceremonies. 

  • Fog effects at most any angle including upside-down
  • 1,400 W heat exchanger produces 480 m 3 (17,000 ft 3 ) per min. fog output
  • Rapid 8-minute ready time
  • Reach new heights with 7 m (25 ft.) fog blast height
  • 2.5 l fluid reservoir for less frequent fill-ups
  • Create ambience with 21 x 3 W single LEDs (7 each R, G, B)
  • 9 vibrant pre-programmed colors
  • Dynamic effects include colour mixing, strobe, dimmer and fog
  • Wireless 4-channel remote control included for fast and easy operation
  • DMX operable for individualised control and design
  • Included adjustable bracket for mounting
  • Common IEC mains inlet – mains cable included by region
Physical
Length455 mm (17.9 in.)
Width305 mm (12 in.)
Height199 mm (7.8 in.)
Height with hanging bracket309 mm (12.2 in.)
Weight, Dry7.3 kg (16.1 lb.)
Weight, Filled8.9 kg (19.7 lb.)
Dynamic Effects
Color mixingRGB
Color selection36 color presets
Electronic dimming0 - 100%
Strobe and pulse effectsVariable speed and action, random strobe
Electronic 'shutter' effectInstant open and blackout
FogOn/Off
Performance
Coverage volume480 m 3 (17,000 ft 3 ) per minute
Maximum Fluid consumption60 ml per minute
Maximum operating time at full output30 seconds
Ready time8 minutes
Control and Programming
Control optionsDMX, 4-channel wireless remote control, pushbutton on/off
Control parameters with wireless remoteOn/off operation
Control parameters with DMXFull-featured
DMX channels8
User interfaceControl panel with LED display
DMX complianceANSI E1.11 - USITT DMX512-A  
Optics
Light source7 x 3 W R LEDs
Light source7 x 3 W G LEDs
Light source7 x 3 W B LEDs
Minimum LED lifetime30 000 hours (to >70% luminous output)*
*Figure obtained under manufacturer's test conditions
Construction
HousingSteel
ColourBlack
Heat exchanger1400 W, thermally protected
Fluid pumpOscillating piston, high pressure
Fluid managementFluid out sensing, sight glass
Fluid reservoir2.5 liter, removable
Hanging bracketIntegrated adjustable yoke
Safety attachment points3-threaded inserts, front/rear/side (M8 eye-bolt included)
Wireless remote control unit (included)4-channel, 30 m (100 ft.) range
Installation
MountingStanding or hanging
OrientationUp to +/- 45° from horizontal
Mounting pointsBracket for single/double rigging clamp, M12 or ½”
Clearance around machine600 mm (24 in.)
Connections
AC powerIEC male inlet, C14
DMX3- and 5-pin locking XLR
Wireless remote receiverDIN 41524, 5-pin, 45°, 180° inlet
Electrical
EU model
AC power220-240 V nominal, 50/60 Hz
Main fuseF 15 AL, 250 V
Typical power and current at 220 V1280 W, 5.8 A*
Typical power and current at 240 V1520 W, 6.3 A*
US model
AC power100-120 V nominal, 50/60 Hz
Main fuseF 15 AL, 125 V
Typical power and current at 100 V980 W, 9.8 A*
Typical power and current at 120 V1400 W, 11.6 A*
*Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal
Maximum ambient temperature (Ta max.)40° C (104° F)
Minimum ambient temperature (Ta min.)5°C (41°F)
Exterior surface temperature, steady state50°C (122°F)
Maximum nozzle temperature300° C (572°F)
Approvals
EU safetyEN 60355-1, EN 62233, EN 62479, EN 60598, EN 62471, EN 60950-1,
EU EMCEN 55103, EN 61000-3- 2, EN 61000-3- 3, EN 61000-6- 1, EN 61000-6- 3
EU RTTE (wireless remote)EN 300220-1, EN 300220-2, EN 301489-1, EN 301489-3