THRILL Mini Profile

SRP £357.50 + VAT

Imagine having the ability to integrate the moving beams of light, shine spotlights when and where you need them, or add the dramatic effect of colors and “gobos” flying around the audience during your live shows. Now you can with the THRILL Mini Profile, Martin professional’s smallest and most affordable moving head to date. THRILL Mini Profile has been designed to help DJs, musicians and entertainers take their performances to the next level–whether they’re in lounge bar or pub, to a wedding or high-energy dance floor.

The THRILL Mini Profile delivers super-sharp optics with over 800 lumens of output via an 18 watt white LED engine. Eight varied gobos and eight vibrant colors are available, with electronic strobe/dimming, manual focus and high-speed pan and tilt. The eye-catching effects can be synchronized to a music beat via audio trigger or run from the four pre-programmed shows. For more custom control options, it can also be operated via DMX.

Despite performing above its class, this ultra-compact fixture weighs only 4.3 kg (9.5 lb.), so it’s easy to transport and set up. Its lightweight design, rugged exterior, and compact form factor make THRILL Mini Profile the perfect fit for on-the-go entertainers, DJs, venues and home enthusiasts that require professional, lighting within their reach. 

  • Profile-style fixture for gobo projection
  • Super sharp optics and an 18 W, white LED engine punch above its class
  • Dynamic effects include electronic dimming and strobe
  • 8 fixed gobos for midair break-ups and projections
  • 8 vibrant dichroic color filters
  • Ultra-smooth and fast pan/tilt
  • Easy to operate standalone sound-activated and master/slave control methods
  • 4 professionally pre-programmed shows
  • DMX operable for individualised control and design
  • Includes bracket for hanging or surface mount
  • Common IEC Power Mains inlet—mains cable included
Length237 mm (9.3 in.)
Width155 mm (6.1 in.)
Height338 mm (13.3 in.)
Height with hanging bracket362 mm (14.25 in.)
Weight4.3 kg (9.5 lb.)
Dynamic Effects
Colour wheel8 colours plus open, variable and random rotation
Static gobo wheel (stamped)8 static gobos plus open, variable and random rotation
StrobeVariable from 3 - 20Hz, pulse effects and random strobe
Electronic dimming0 - 100%, four dimming curve options
Control and Programming
Control optionsDMX, 4 stand-alone shows, master/slave
DMX channels10
Stand-alone triggerSound-trigger, auto-run
InterfaceControl panel with backlit LCD display
DMX complianceANSI E1.11 - USITT DMX512-A  
Light source18 W white LED engine
Minimum LED lifetime50 000 hours (to >70% luminous output)*
Beam angle14°
*Figure obtained under manufacturer's test conditions
HousingHigh-impact flame-retardant thermoplastic on metal frame
IP ratingIP 20
OrientationStanding or hanging
Mounting pointsBracket for single rigging clamp, M12 or ½”
LocationDry location only
Minimum distance to illuminated surfaces200mm (8in.)
Minimum distance to combustible materials100mm (4in.)
Minimum clearance around fans and vents100mm (4in.)
AC power inputIEC male inlet, C14
DMX data in/out3-pin and 5-pin locking XLR
AC power100-240 V nominal, 50/60 Hz
FuseT 2AL, 250 V
Typical Power and Current
120 V, 60 Hz52 W, 0.8 A *
230 V, 50 Hz50 W, 0.5 A *
Typical half-cycle RMS inrush current6.4 A
*Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
CoolingForced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.)40° C (104° F)
Minimum ambient temperature (Ta min.)0° C (32° F)
Total heat dissipation (calculated, +/- 10%, at full intensity, full white)180 BTU/hr.
EU safetyEN 60598-2- 17 (EN 60598-1), EN 62471, EN 62493
EU EMCEN 55015, EN 55032, EN 55103-2, EN 61000-3- 2, EN 61000-4- 2, EN 61547