Martin MAC Aura XB

Overview

The MAC Aura XB takes an award-winning, innovative, compact LED wash light to the next level, incorporating many new features first introduced with the MAC Quantum Wash™.

Not only does the MAC Aura XB offer additional brightness, it also features a new superior colour mixing system and an optimised lens design for tighter beams and more even washes. Martin's unique and patented Eye-candy Aura Effect™ is also part of the package.

Super bright single lens wash with fully premixed colour
Compact design and low weight
High efficiency, low power consumption, long service life

Key Features

Super-bright single-lens wash with fully premixed colour
Broad colour palette, RGBW colour mixing
Eye-candy Aura Effect™
Uniform shades
Built-in FX engine
10 to 60° uniform zoom
6000 Lumens output
Rapid movement
Compact, low weight design (6.5 kg)
High efficiency, low power consumption, long lifetime

Specifications

Physical
Length (across yoke)	302 mm (11.9 in.)
Width (across yoke)	302 mm (11.9 in.)
Height (head straight up)	360 mm (14.2 in.)
Weight (without accessories)	6.5 kg (14.4 lbs.)
Dynamic Effects
Beam colour mixing	RGBW
Aura (secondary lens array illumination) colour mixing	RGB
Beam colour temperature control	CTO, variable 10 000 - 2500 K
Beam and aura electronic 'colour wheel' effect	33 LEE-referenced colours plus white, variable-speed colour-wheel rotation effect and random colour
Beam and aura independent shutter effects	Electronic, with regular and random pulse, burst and strobe effects
Pre-programmed effects	Range of independent and synchronised Beam and Aura FX, two combinable
Electronic dimming	Independent beam and aura, four dimming curve options
Zoom	10° - 60° (one-tenth peak angle)
Pan	540°
Tilt	232°
Pan and tilt speed	Adjustable via onboard control panel and DMX
Control and Programming
Control options	Independent or synchronized Beam and Aura control
Control system	DMX, RDM
Control resolution	8-bit, with 16-bit control of pan & tilt
DMX channels	14/25
Setting and addressing	Control panel with backlit graphic display
DMX compliance	USITT DMX512-A
RDM compliance	ANSI/ESTA E1.20
Transceiver	RS-485
Firmware update	Via DMX with Martin™ USB Duo DMX Interface Box
Optics and Photometric Data
Light source	19x 15W RGBW
LED Array System LED refresh rate	Beam 1200 Hz, Aura 4395 Hz
Minimum LED lifetime	50 000 hours (to >70% luminous output)*
Total luminous output (wide, one-tenth peak)	6000 lumens
Total luminous output (narrow, one-tenth peak)	4300 lumens
Video compatibility	Designed for use with HD/high-speed video cameras
* Figure obtained under manufacturer´s test conditions
Construction
Colour	Black
Housing	High-impact thermoplastic, flame-retardant to UL 94 5VA
Protection rating	IP20
Installation
Mounting points	M12 hole for rigging clamp, attachment points for surface-mounting bracket
Orientation	Any
Minimum distance to combustible materials	200 mm (8 in.) from fixture
Minimum distance to illuminated surfaces	1 m (3 ft. 4 in.) from fixture
Location	Indoor use only, must be fastened to surface or structure
Connections
AC power	Neutrik PowerCON TRUE1 NAC3PX dual socket
AC power input socket	Accepts Neutrik PowerCON TRUE1 NAC3FX-W cable connector AC power thru socket
Electrical
Maximum power consumption	400 W
Power supply unit	Auto-ranging electronic switch mode
AC power	100-240 V nominal, 50/60 Hz
Typical half-cycle RMS inrush current	10.7 A
Power consumption, all effects static, zero light output	<25 W
Typical Power and Current
100 V, 60 Hz	359 W, 3.8 A, PF 0.99
120 V, 60 Hz	355 W, 3.2 A, PF 0.99
208 V, 60 Hz	350 W, 1.8 A, PF 0.97
230 V, 50 Hz	349 W, 1.7 A, PF 0.95
240 V, 50 Hz	349 W, 1.6 A, PF 0.95
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal
Cooling	Forced air (temperature-regulated, low noise, user-definable levels)
Maximum ambient temperature (Ta max.)	40° C (104° F)
Minimum ambient temperature (Ta min.)	5° C (41° F)
Total heat dissipation (calculated, +/- 10%)	1230 BTU/hr.
Approvals
EU safety	EN 60598-2-17 (EN 60598-1), EN 62471
EU EMC	EN 55103-1, EN 55103-2, EN 55015, EN 61547
US safety	UL 1573 US EMC: FCC Part 15 Class A
Canadian safety	CSA E598-2-17 (CSA E60598-1)
Canadian EMC	ICES-003 Class A
Australia/NZ	C-TICK N4241