Exterior Linear Pro Graze QUAD

Outdoor Linear Graze Fixture with Colour Boosting Technology and Dedicated Colour Temperature Channel

SRP from £395.00 + VAT

Martin Exterior Linear Pro Graze QUAD lights are flexible, compact, LED-based architectural fixtures featuring high output with colour boost technology and discreet yet robust housings. Delivering uniform light distribution of 15 degrees, they are perfect for highlighting textured surfaces, walls, facades, ceilings and other surfaces in stadiums and arenas, cruise ships, theme parks, hotels, casinos, bridges, tunnels or other permanent indoor or outdoor installations.

Graze QUAD models feature homogenised colour mixing with 8 LEDs/ft and an integrated colour boosting feature for full-powered illumination of a single colour or mixed colours. Each unit is factory calibrated for superior colour consistency, making them up to three times brighter than comparable fixtures, yet boasting lower total power consumption. Logic RGB control of the RGBW engine is also included where white is automatically calculated. Optional micro lens film can be added for a wide range of additional beam configurations.

Packed with intelligent features, these fixtures offer a dedicated colour temperature control channel, which accurately follows the black body curve, empowering lighting designers to set their favourite default colour temperature. Integrated segment control allows the fixtures to be controlled down to 6-inch (15 cm) segments, creating more organic and subtle colour transitions.

With a high focus on sustainability, these lights can be daisy-chained using a combined power and data connector, enabling long fixture runs for simpler infrastructures. Simple beam angle changeability makes late design changes and on-site adjustments easy and a smart mounting plate design offers a variety of standard or custom bracket solutions.

The slim design of these lights makes them easier to integrate into architectural elements with less structural requirements. All models are available in either 1ft or 4ft linear lengths and are shipped in FSC certified packaging.

  • Colour-calibrated QUAD colour LEDs (8 LEDs/ft)
  • Homogenous colour mixing
  • Narrow 15° beam angle
  • Dedicated colour temperature control channel (1800K - 12000K)
  • Selectable segment modes (1, 4 or 8 segments)
  • Selectable power consumption (12W/10W/5W) per foot
  • 5W/ft power mode meets ASHRAE standards for linear facade lighting
  • Integrated multi-range power supply unit (PSU) 100-277V for long fixture runs
  • Hybrid power and data connector for easy daisy-chained configurations
  • DMX and RDM control
  • Integrated magnetic switch for local diagnostics
  • Rugged IP66 housing designed for permanent outdoor installations
  • Low weight 0.8 kg/ft (1.9 lbs/ft)
  • Compact design - 40mm (1.57 inch) width
PHYSICAL
Width40 mm (1.57 inch.)
Height68 mm (2.67 inch)
Length - 1 ft Version312mm (1.02 ft)
Length - 4 ft Version1227mm (4.02 ft)
Weight - 1 ft Version0.85 kg (1.9 lbs)
Weight - 4 ft Version2.8 kg (6.2 lbs)
DYNAMIC EFFECTS
Colour mixingRGBW
Colour temperature controlCCT: 1800K – 12000K (default 4000K)
Intensity0 - 100%
Segment Control0.5 ft, 1 ft or full 4 ft fixture control
CONTROL AND PROGRAMMING
Control systemsDMX, RDM
Control resolution8-bit DMX individual color control
User interfaceMagnetic button to call up fixture status and test fixture
Stand-alone controlUp to 20 scenes with individual fade/hold times
DMX complianceUSITT DMX512/1990
RDM complianceANSI/ESTA E1.20
Dimmer Resolution16-bit DMX control of intensity
DMX channels 4ft6/4/3/12/24 (standard/RAW/1 seg/4 seg/8 seg)
DMX channels 1ft6/4/3/6 (standard/RAW/1 seg/2 seg)
  • Power/data in/thru: 8-pin custom connectors
  • Surge Protection: 4 KV
  • Maximum connected 4 ft fixtures *: 42 pcs (52 m /169 ft) @ 230-277 V
  • Maximum total string length (cable + fixtures)*: 150 m / 328 ft
  • * Refer to system diagram for details on fixture run limitations.
  • AC power: 100-277 V AC nominal, 50/60 Hz
  • Power supply unit: Auto-ranging electronic switch mode
  • Typical half-cycle RMS inrush current at 230 V, 50 Hz: 0.35 A
  • Typical earth-leakage current 1 ft: 0.15 mA
  • Typical earth-leakage current 4 ft: 0.21 mA
  • Power Factor 12 W / 10 W mode: 0.95 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.90 @ 277 V
  • Power Factor 5 W mode: 0.90 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.70 @ 277 V
  • Power Consumption 1 ft
  • Maximum: 12 W / 10 W / 5 W *
  • Idle: 1.54 W *
  • Power Consumption 4 ft
  • Maximum: 48 W / 40 W / 20 W *
  • Idle: 2.30 W *
  • * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
  • Idle: steady state, all LEDs at zero intensity.
  • Power Consumption: Depending on power setting mode.
  • Light source: QUAD colour LED (8 LEDs per foot)
  • Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
  • Binning: Tight colour and flux binning
  • Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse)
  • Beam angle**: 15° , 15° x 30°, 15° X 60°
  • *Figure obtained under manufacturer's test conditions
  • ** Asymmetric beam angles for available as accessory micro-lens films
  • CRI (Color Rendering Index) : >70
  • CCT: 1800K – 11000K (default 4000K)
  • Luminous output:
  • 1 ft at 12W 4 ft at 48W
  • FULL: 700 lumens 2980 lumens
  • RED: 260 lumens 1210 lumens
  • GREEN: 570 lumens 2370 lumens
  • BLUE: 120 lumens 530 lumens
  • * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
SKU Manufacturer’s SKU Image Name Colour/description
MAR1922 MAR-90570000 MARTIN EXTERIOR Linear Pro-Graze, Quad, 1ft MARTIN EXTERIOR Linear Pro-Graze, Quad, 1ft Graze QUAD - 1ft
MAR1923 MAR-90570003 MARTIN EXTERIOR Linear Pro-Graze, Quad, 4ft MARTIN EXTERIOR Linear Pro-Graze, Quad, 4ft Graze QUAD - 4ft