Designed to fulfil the demand for a bright, compact, tour-worthy moving head, the Martin ERA 400 Performance CLD combines a feature-loaded and rugged, yet cost-efficient profile for entertainment and rental applications.
It features a highly efficient 300W cold white LED engine that produces a bright, sharp 6,500K gobo projection with a flat field. Additional key benefits include 1:3 zoom, electronic dimming and strobe, full CMY colour mixing and separate colour wheel, iris for beam adjustment and fixed and rotating gobo wheels, loaded with user-favourite gobos from the renowned Martin MAC range that include a wide variety of effects, especially when combined with the included rotating prism.
The ERA 400 Performance CLD includes a full curtain framing system which offers lighting designers a high degree of flexibility to achieve precise looks on stage. When fully focused, gobos can be nicely framed with a soft edge, and each of the four framing blades can cross the entire beam independently for a full blackout.
The entire system can rotate 90 degrees, allowing designers to direct light exactly where they want it to go and achieve unique movement effects not otherwise possible.
Whether being used for small and mid-sized concert and touring, live TV productions, corporate shows, cruise line or houses of worship, the Martin ERA 400 Performance CLD is ideal for a long list of scenarios, requiring a truly versatile LED profile that offers near limitless design and usage potential.
FULL FRAMING SYSTEM
The full curtain framing system allows each of the four framing blades to cross the entire beam independently for full blackout. In addition, the entire framing module can rotate ± 45 degrees, allowing for precise and accurate image projection for the desired stage area. When fully focused, gobos can be framed with a soft edge, enabling designers a high degree of flexibility in the lighting design.
300 WATT LED LIGHT SOURCE
With an efficient 300 watt light source, the ERA400 delivers more output than similar-sized fixtures. Fully electronic dimming ensures extremely fast strobing, instant intensity control, and a flat, consistent field that can be maintained down to zero percent.
CMY COLOUR MIXING
Offers subtle pastels to vibrant colours, as well as fast transitions and smooth fades. The colour wheel produces nice colour splits, fast colour bumps & extends overall colour gamut and brightness. Also features a CTO filter to obtain a 3000K tungsten colour temperature.
1:3 ZOOM RANGE
With 10 to 30 degrees of zoom, the ERA400 Performance works great on various trim heights and the 30-degree wide-angle delivers enough spread for great coverage on smaller stages. Zooming is fast and accurate and maintains a high output throughout the range.
COMPACT AND DESIGNED FOR THE ROAD
The ERA400 is a very compact and low weight for its class making it easy to handle and rig. The modular design makes accessing & replacing of effects safe, quick, and easy – modules can be swapped in less than a minute.
|Electronic 'shutter' effect||Strobe effect, pulse effects, instant open and blackout|
|Electronic dimming||0 - 100%, four dimming curve options|
|Colour mixing||CMY, independently variable 0-100%|
|Colour wheel||9 colour filters plus open|
|Rotating gobo wheel||7 gobos plus open, wheel rotation, gobo rotation, indexing and shake|
|Static gobo wheel||9 gobos plus open, wheel indexing, rotation and shake|
|Framing||Rotatable framing module, +/- 45°, with 4 individually controllable full framing blades with variable angle and position.|
|Prism||Rotating/indexing three-facet prism|
|Pan||540°, coarse & fine control and speed|
|Tilt||260°, coarse & fine control and speed|
|CONTROL AND PROGRAMMING|
|16-bit control||Dimming, pan and tilt|
|Setting and addressing||Control panel with backlit LCD display|
|DMX compliance||USITT DMX512/1990|
|RDM compliance||ANSI/ESTA E1.20|
|OPTICS AND SOURCE|
|Front Lens Diameter||110 mm|
|Zoom range||10° - 30°|
|Light source||300W LED engine|
|Minimum LED lifetime||20000 hours (to >70% luminous output) ** Manufacturer´s figure obtained under manufacturer´s test conditions|
|Light engine luminous output||26500 lumens|
|Fixture luminous output||10000 lumens|
|CRI (Color Rendering Index)||>70|
|LED refresh rate||1200 Hz|
|Housing||High-impact flame-retardant thermoplastic|
|Protection rating||IP 20|
|Gobo diameter||26.8 mm +/- 0.2 mm (1.1 in. +/- 0.008 in.)|
|Maximum image diameter||19.0 mm (0.75 in.)|
|Gobo thickness, maximum||1.1mm borosilicate glass|
|Installation mounting points||Two quarter-turn brackets for rigging clamps|
|AC power input, thru||Neutrik powerCON TRUE1|
|DMX data in/out||3-pin & 5-pin locking XLR|
|AC power||100-240V nominal, 50/60 Hz|
|Power supply unit||Auto-ranging electronic switch mode|
|TYPICAL POWER AND CURRENT|
|120V, 60Hz||3.8A, 455W, PF 0.992|
|230V, 50Hz||1.96A, 442W, PF 0.968|
|Steady Power Consumption||44 W, all effects static, zero light output|
|Half-cycle RMS inrush current||6A (at 230 V, 50 Hz). Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. PF = power factor.|
|Cooling||Forced air (temperature regulated, low noise)|
|Maximum ambient temperature (Ta max.)||40° C|
|Minimum ambient temperature (Ta min)||0° C|
|Maximum surface temperature||70° C (158° F), steady state at 40° C ambient|
|Total heat dissipation||1550 BTU/hr. (calculated, +/- 10%)|
|EU safety||EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493|
|EU EMC||EN 55015; EN 55032; EN 55035; EN 61000-3-2,-3; EN 61547|
|US safety||UL 1573|
|US EMC||FCC Part 15 Class B|
|Canadian safety||CSA C22.2 No. 166|
|Canadian EMC||ICES-003 Class B, ICES-005 Class B|
|Global CB Certification/IECEE||EC 60598-2-17 (IEC 60598-1)|
Modern LED moving head workhorse for entertainment and rental applications
RRP ex VAT: £2,615.00
The Martin ERA 300 Profile is a very compact profile fixture with an extremely efficient 260W white LED engine that produces a sharp gobo projection with a flat field and more output than typically associated with similar-sized and featured fixtures. This modern, everyday workhorse is designed to fit anywhere, is easy to handle and rig, takes up less truck space, and boasts full, professional features, including CMY colour mixing and 1:2 zoom and 9,500 lumens of output. …View details
300W warm LED based profile with framing and CMY colour mixing
RRP ex VAT: £3,635.00
The Martin ERA 400 Performance is a very compact framing moving head with a 300W white LED engine that produces a sharp gobo projection with a flat field and a complete feature set. The new moving head is available in two variants - CLD which features a 6500K LED with 10,000 lumens out of the fixture and WRM which features a 3200K LED with 5,000 lumens out of the fixture. …View details
550W LED based profile with framing and CMY colour mixing
RRP ex VAT: £6,300.00
Designed to fulfill the demand for a bright, compact, tour-worthy moving head, the Martin ERA 600 Performancecombines a feature-loaded and rugged, yet cost-efficient profile for entertainment and rental applications. It features a highly efficient 550W white LED engine that produces a bright, sharp 6,500K image projection with a flat field.…View details
800W LED based profile with framing and CMY colour mixing
RRP ex VAT: £8,555.00
Designed to fulfill the demand for an ultra-bright, compact, tour-worthy moving head, the Martin ERA 800 Performancecombines a feature-loaded and rugged, yet cost-efficient profile for entertainment and rental applications. It features a highly efficient, super-bright 800W white LED engine that produces a bright, sharp 6,500K gobo projection with a flat field.…View details
We have placed cookies on your device to help make this website better.
You can use this tool to change your cookie settings. Otherwise, we’ll assume you’re OK to continue.