AM7315/95

High Power 3-Way Loudspeaker

SRP £4,740.00 + VAT

AM7315/95 is a high power 3-way full-range loudspeaker system comprised of one 380 mm (15 in) Differential Driver low frequency driver, one 200 mm (8 in) CMCD Cone Midrange Compression Driver, and one 38 mm (1.5 in) exit/75 mm (3 in) voice-coil HF compression driver. The multi-band PT Progressive Transition mid-high frequency waveguide provides well-controlled 90??? by 50??? coverage and is rotatable for cabinet positioning in either horizontal or vertical orientation. High-slope crossovers minimize band overlap and well-controlled off-axis response enhances arrayability. The cabinet is fitted with M10 threaded suspension points. Preengineered array bracketry is available. AM7315/95 is part of JBL's AE Application Engineered Series, a versatile family of loudspeakers for a wide variety of fixed installation applications.

  • 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.
  • 2265H Differential Driver Low- Frequency Driver
  • CMCDT Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.
  • 2432H High-Frequency Compression Driver
  • PTT Progressive Transition Waveguide for excellent pattern control with low distortion.
  • Bi-Amp/Tri-Amp Switchable.
  • Optional planar array frame kit (see AE Series Array Guide).
Frequency Range (-10 dB) 38 Hz - 20 kHz
Frequency Response (±3 dB) 45 Hz - 18 kHz
Coverage Pattern90° x 50°, rotatable waveguide
Directivity Factor (Q)11
Directivity Index (DI)10.5 dB
Crossover ModesTri-amp/Bi-amp switchable
Crossover Frequencies300 Hz and 2.2 kHz
Transducer Power Rating (AES)LF: 1000 W (4000 W peak), 2 hrs750 W (3000 W peak), 100 hrsMF: 350 W (1400 W peak), 2 hrsHF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating (IEC)LF: 600 W (2400 W peak), 100 hrsMF/HF: 200 W (800 W peak), 100 hrs
Maximum SPLLF: 127 dB-SPL cont avg (133 dB peak)Tri-amp mode:MF: 133 dB-SPL cont avg (139 dB peak)HF: 133 dB-SPL cont avg (139 dB peak)Bi-amp mode:MF/HF: 133 dB-SPL cont avg (139 dB peak)
System Sensitivity of Passive Sections (1W @ 1m)MF/HF Section in Bi-amp mode: 108 dB SPL
Nominal Impedance8 ohms
Low Frequency Driver1 x JBL 2265H 380 mm (15 in ) Differential Drive driver with 75 mm (3 in) dual voice coil
Sensitivity (1W @ 1m) (Low Frequency)97 dB SPL
Midrange DriverJBL CMCD-82H Cone Midrange CompressionDriver with integral 200 mm (8 in) diameterDifferential Driver dual voice coil internal driver
Sensitivity (1W @ 1m) (Midrange)108 dB SPL
High Frequency DriverJBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Sensitivity (1W @ 1m)(High Frequency)113 dB SPL
WaveguidePT-K95MH
EnclosureTrapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
FinishBlack DuraFlexT finish. White available upon request.
GrillePowder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector NL8 Neutrik Speakonr and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation)967 x 561 x 657 mm(38.1 x 22.1 x 25.9 in)
Net Weight 45.8 kg (101 lb)
Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.