AM5212/26

2-Way Loudspeaker System with 1 x 12

SRP £2,115.00 + VAT

The AM5212/26 is a medium power,
lightweight, 2-way, full-range loudspeaker
system comprised of the JBL Differential
Driver dual voice coil and dual magnetic
gap 262H-1 300 mm (12 in) low
frequency driver and 2408H-1 high frequency
38 mm (1.5 in) exit, 38 mm
(1.5 in) voice-coil compression driver.
The large format PTT Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so
the loudspeaker system can be used in
either the vertical or horizontal
orientation. High-slope passive networks
minimize band overlap. Well-controlled
off-axis response enhances arrayability.

  • 120° x 60° Coverage
  • 262H-1 Differential Driver Low-Frequency
  • Driver
  • 2408H-1 High-Frequency Compression
  • Driver
  • Large PT™ Progressive Transition
  • waveguide for excellent pattern control
  • and low distortion
  • Rotatable waveguide for vertical or
  • horizontal orientation
  • Bi-Amp/Passive Switchable
  • Available in Black, White and WRC/WRX
  • weather resistant finishes
Frequency Range (-10 dB)37 Hz - 20 kHz
Frequency Response (±3 dB)43 Hz - 18 kHz
Coverage Pattern /64: 60° x 40°/66: 60° x 60°/95: 90° x 50°/00: 100° x 100°/26: 120° x 60°
Directivity Factor (Q)8.2
Directivity Index (DI)9.1 dB
Crossover ModesBi-amp/Passive switchable
Passive Crossover Frequency1.5 kHz
Transducer Power Rating (AES)LF: 400 W (1600 W peak), 2 hrs300 W (1200 W peak), 100 hrsHF: 40 W (160 W peak), 2 hrs
Long-Term System Power Rating (IEC)Passive mode: 300 W (1200 W peak), 100 hrs
Maximum SPLBi-amp mode:LF: 122 dBHF: 131 dB
System Sensitivity (1W @ 1m)Passive mode: 115 dB SPL
Low Frequency Driver1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil
Nominal Impedance8 ohms
Sensitivity (1W @ 1m, within operational band)97 dB SPL
High Frequency DriverJBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil
Nominal Impedance8 ohms
Sensitivity (1W @ 1m)113 dB SPL
WaveguidePT-H126HF-1
EnclosureTrapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood
Suspension Attachment15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware
FinishBlack DuraFlex™ finish. White available upon request.
GrillePowder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input ConnectorNL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental SpecificationsMil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D invertical cabinet orientation)713 x 371 x 458 mm(28.06 x 14.6 x 18.1 in)
Net Weight20.2 kg (45 lb)
Optional AccessoriesM10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3
Coverage Pattern /64 - 60° x 40°
Coverage Pattern /9590° x 50°
Coverage Pattern /00100??? x 100???