The AM5212/00 is a medium power,
lightweight, 2-way, full-range loudspeaker
system comprised of the JBL Differential
Driver dual voice coil and dual magnetic
gap 262H-1 300 mm (12 in) low
frequency driver and 2408H-1 high frequency
38 mm (1.5 in) exit, 38 mm
(1.5 in) voice-coil compression driver.
The large format PTT Progressive Transition
waveguide provides excellent 100??? x 100???
coverage. The waveguide is rotatable so
the loudspeaker system can be used in
either the vertical or horizontal
orientation. High-slope passive networks
minimize band overlap. Well-controlled
off-axis response enhances arrayability.
|Frequency Range (-10 dB)||37 Hz - 20 kHz|
|Frequency Response (±3 dB)||43 Hz - 20 kHz|
|Coverage Pattern||100° x 100°|
|;Directivity Factor (Q)||8.3|
|Directivity Index (DI)||9.2 dB|
|Crossover Modes||Bi-amp/Passive switchable|
|Passive Crossover Frequency||1.6 kHz|
|Transducer Power Rating (AES)||LF: 400 W (1600 W peak), 2 hrs300 W (1200 W peak), 100 hrsHF: 40 W (160 W peak), 2 hrs|
|Long-Term System Power Rating (IEC)||Passive mode: 300 W (1200 W peak), 100 hrs|
|Maximum SPL||Bi-amp mode:LF: 122 dB-SPL cont avg (128 dB peak)HF: 127 dB-SPL cont avg (133 dB peak)Passive mode:121 dB-SPL cont avg (127 dB peak)|
|System Sensitivity (1W @ 1m)||Passive mode: 96 dB SPL|
|Low Frequency Driver||1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil|
|Nominal Impedance||8 ohms|
|Sensitivity (1W @ 1m, within operational band)||97 dB SPL|
|High Frequency Driver||JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil|
|Nominal Impedance||8 ohms|
|Sensitivity (1W @ 1m)||111 dB SPL|
|Enclosure||Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood|
|Suspension Attachment||15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware|
|Finish||Black DuraFlex™ finish.White available upon request.|
|Grille||Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing|
|Input Connector||NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.|
|Environmental Specifications||Mil-Std 810; IP-x3 per IEC529.|
|Dimensions (H x W x D invertical cabinet orientation)||713 x 371 x 458 mm(28.06 x 14.6 x 18.1 in)|
|Net Weight||20.2 kg (45 lb)|
|Optional Accessories||M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3|
Sound Technology’s professional audio products are specified and supplied by leading resellers and integrators throughout the country, together with a select number of trade distributors.
If you are a trade customer please call Sound Technology Ltd on +44(0)1462 480000 for more information or call one of our sub-distributors listed below.
We have placed cookies on your device to help make this website better.
You can use this tool to change your cookie settings. Otherwise, we’ll assume you’re OK to continue.