DCi4|300DA

Four-channel, 300W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio, and 70V/100V


For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.

  • • Redundant Dante ports
  • Primary
  • Secondary
  • Will accept 48khz or 96khz
  • Capable of sending out Dante audio from analog inputs pre/post processing (@ 48kHz)
  • • Audio Architect Control and Monitoring
  • • DriveCore Amplifier Technology
  • • Universal PFC Power Supply
  • • DSP
  • 48kHz processing
  • 20 Presets
  • Input router
  • • High, medium, and low priority inputs
  • Input delay up to 2s
  • Input EQ
  • Crossover
  • Output EQ
  • Output Delay up to 100ms
  • LevelMAX limiter
  • Load Monitoring
  • • Pilot tone
  • Normal
  • Burst
  • • Continuous Load Monitoring
  • • Sweep Load Monitoring
  • Channel Auto-Standby
  • Speaker Tunings
  • • Aux-Port
  • Sleep contact closure
  • Amp Status output
  • • Removable air filters
  • • Front panel LED indicators
  • POWER SPECIFICATIONS
  • • Dual-Mode - All Channels Driven
  • 2Ω: 300W
  • 4Ω: 600W
  • 8Ω: 600W
  • 16Ω: 300W
  • 70Vrms: 600W
  • 100Vrms: 600W
  • • Bridge Mono – All Channels Driven
  • 4Ω: 600W
  • 8Ω: 1200W
  • 16Ω: 1200W
  • 140Vrms: 1200W
  • 200Vrms: 1200W