Award Winning Pedigree
Camden EC1 introduces one of the cleanest and most transparent preamps on the market into a standalone, desktop-friendly chassis that can integrate with any audio interface. Designed to compete with the very best, the Camden preamp itself achieves unprecedented low-noise and low-distortion performance as well as frequency and phase linearity at all gain settings.
Capture your source with complete transparency; boost low-sensitivity microphones without adding noise and colouration; and capture instant and coherent transients without phase shift that cause summing abnormalities. Camden EC1 exhibits performance specifications that exceed the most revered ‘transparent’ preamps on the market. It’s 12-way rotary Gain switch enables easy recallability of preamp gain whilst it’s dedicated mic, line, and hi-z input modes allows Camden EC1 to not only become your go-to mic preamp, but also a line-level saturator and instrument DI thanks to dedicated ¼” jack Link outputs for each channel.
Using it’s Mojo analogue saturation control, Camden EC1’s transforms from extraordinarily clean, natural, and precise sounding, into thick, gooey, and vintage-sounding at the turn of a dial. With two discrete Mojo styles; Thump and Cream, Camden EC1 can perfectly imitate vintage transformer or valve-based preamps at the turn of a dial. Mojo’s saturation is completely variable, allowing you to dial-in the amount of saturation you need for each source. Keep it at 3-4 for authentic preamp saturation or crank it up to 11 for a more exaggerated effect!
Perhaps most crucially and unlike transformer-based preamps, when you need something clean and transparent for a particular session/source, Mojo can be completely bypassed and removed from the signal using the pots’ built-in, true-bypass switch to reveal the true clarity of the Camden preamp design. Record through Mojo to apply instant analogue colouration during tracking or send line-level sources through the Mojo to add vintage colouration to your DAW tracks or stereo bus during the mix phase.
Advanced Tracking And Reamping Tool
The Camden EC1’s reference-quality headphone amplifier and independent, 4ch line mixer allows for direct, zero-latency monitoring of the Camden preamp using headphones connected directly to Camden EC1’s front panel. Monitor the preamp directly using headphones during mic placement to find the sweet spot of the instrument/source, or create a zero-latency, analogue headphone mix by mixing the preamp with external playback from dedicated Stereo Aux and Mono Ext Line Inputs.
Camden EC1 features an extraordinary Hi-Z instrument D.I. circuit with a dedicated ¼” jack Link output - the combination makes Camden EC1 the perfect tool for reamping bass and electric guitars on studio or stage. Simply connect your instrument to its Hi-Z input for unparalleled DI performance, and connect the ¼” Link output of the preamp to your amplifier/effects pedals for wet/dry recording and reamping.
Camden EC1 also utilises Cranborne Audio’s unique C.A.S.T. system for distributing audio around the studio or stage using affordable Cat 5e, Cat 6, or Cat 7 cabling whilst achieving the highest sonic results.
Connect Camden EC1’s C.A.S.T. OUT port to Cranborne Audio’s 500R8 or 500ADAT, and you can send Camden EC1’s preamp directly to the interface's input ready for further processing and recording. At the same time through the same cable, 500R8/500ADAT transmit their built-in monitor mix directly to Camden EC1’s headphone mixer for monitoring.
This allows 500R8/500ADAT users to relocate their Camden EC1’s preamp and headphone amplifier into the live room using a single Cat 5e, Cat 6, or Cat 7 cable whilst freeing-up 500 series slots in 500R8/500ADAT for more EQ and Compressor modules and extra processing before hitting 500R8/500ADAT’s converters.
|Test Signal Path||APx555 (Line Out) - Input 1 - Line Output - APx555 (Line In)|
|Input Impedance||Mic= 8.9 kOhms 48v Off, 5.4 kOhms 48v ON, Line = 24.3 kOhms, Hi-Z= 1.5 MOhm Unbalanced, 3 MOhm Balanced|
|Max Input Level||Mic = +17.6dBu (<0.003% THD), Line = +26.5dBu (<0.02% THD), Hi-Z = +24dBu (<0.02% THD)|
|Minimum Gain||Mic= 8dB, Line = 0dB, Hi-Z = 3dB|
|Maximum Gain||Mic = 68dB, Line = 60dB, Hi-Z = 63dB|
|Equivalent Input Noise (EIN)||<-129.5dBu (150 Ohm source, unweighted), <-131dBu (150 Ohm source, A-weighted), <-135.5dBu (Inputs common, unweighted)|
|Frequency Response||±0.7dB (<1 Hz to >1000 kHz, Min Gain), ±0.7dB (<1 Hz to >1000 kHz, 35dB Gain), ±1dB (<1.5 Hz to 900 kHz, 63dB Gain), ±1dB (<5 Hz to >200 kHz, Max Gain)|
|Phase Shift||<2.75° (20Hz to 20kHz, 40dB Gain), <4° (20Hz to 20kHz, 63dB Gain), <6° (20Hz to 20kHz, Max Gain) HD+N <0.00025% (1kHz, 35dB Gain, +24dBu out)|
|Intermodulation DIstortion||<0.0006% (50Hz and 7kHz, 35dB gain, +20dBu out), <0.0005% (50Hz and 7kHz, 35dB gain, +15dBu out)|
|Hi-Pass Filter (HPF)||80Hz, -3dB, 12dB/Oct|
|CMRR||>70dB, typ >85dB, 35dB gain, 10-20kHz, 100mV Common mode|
|Slew Rate||20V/uS, 35dB gain, +25dBu out|
|48v LED Thresholds||Off = 48v Off, voltage fully discharged, Amber = 48v voltage charging/discharging, Red = 48v fully charged|
|Signal LED Meter Thresholds||Blue = -20dBu, Green = -12dBu, Amber = +21dBu, Red = +24dBu|
|Max Output Level||Balanced XLR = +27.5dBu (<0.002% THD, 30dB Gain), Impedance Balanced ¼” Jack = +21.5dBu (<0.002% THD, 30dB Gain)|
|Output Impedance||Balanced XLR = 150 Ohm, Impedance Balanced 1/4” Jack = 150Ohm Balanced, 75 Ohm Unbalanced|
|Link Max Output Level||Impedance Balanced 1/4” Jack = +21.8dBu (<0.006% THD)|
|Link Output Impedance||Impedance Balanced 1/4” Jack = 75 Ohm Unbalanced, 150 Ohm Balanced (Buffered Output)|
|Test Signal Path||APx555 (Line Out) - AUX Input - Headphone Output - APx555 (Line In)|
|Frequency Response||-1dB, <1Hz to >70kHz|
|THD||<0.0006% (-104.4dB) @ +20dBu, 1kHz, A-weighted, 300 Ohm load|
|THD+N||<0.00085% (-101.4dB) @ +20dBu, 1kHz, A-weighted, 300 Ohm load|
|Output Impedance||0.33 Ohms, Output Wattage|
|Dynamic Range||114.5dB A-weighted, AES17 method, 20Hz - 20kHz, 300 Ohm load|
|Noise Floor||-93.5dBu A-weighted, 20Hz - 20kHz, 300 Ohm load|
|AC Requirements||100V – 240V AC, 50 – 60 Hz|
|Total Power Consumption||24v, 1.25A DC, 30W|
|Operating Temperature||+1 to 35 degrees Celsius|
|Storage Conditions||-20 to 50 degrees Celsius|
|Height||44.45mm (1.75") (1u)|
|Unit Weight||1.8kg (3.9lb)|
|Carton Weight||2.6kg (5.7lb)|
500 Series Preamp and Signal Processor
RRP ex VAT: £249.17
Put simply, Camden 500 is the most astoundingly clean, linear, and transparent preamp you’ve ever heard. But it can also be the most colourful and characterful at the turn of a dial.…View details
Two Channel Preamp, Signal Processor, and Dual Headphone Mixer
RRP ex VAT: £915.83
The ultimate studio front-end, Camden EC2 combines award-winning mic/line/hi-z preamps with Cranborne Audio’s acclaimed Mojo analogue saturation circuits and two reference-quality headphone amplifiers with discrete line mixers.…View details
We have placed cookies on your device to help make this website better.
You can use this tool to change your cookie settings. Otherwise, we’ll assume you’re OK to continue.