Seating Capacity: 51,000Read more
The BSS Audio BLU-HIF Telephone Headset Interface facilitates connection of the headset jack of a VoIP/digital phone to an AEC input and analog output of a Soundweb London device. The BLU-HIF therefore allows the VoIP/digital phone to be used as the dialing interface and hybrid for a conference system. This simple interface eliminates the programming requirements associated with third-party control systems, while providing a familiar and low-cost dialing interface to the end user.
The BLU-HIF features an RJ-22 jack for connection to the headset jack of a VoIP/digital phone, a balanced input (Tx) for sending near-side audio, and a balanced output (Rx) for receiving far-side audio. While the BLU-HIF provides substantial isolation of the Rx and Tx signals, near-side audio will still be heard on the Rx channel due to the presence of side-tone. As such, BSS Audio recommends always feeding the Rx channel to an AEC input, as opposed to a standard analog input. The AEC algorithm will remove the side-tone. The Tx channel connects to a standard analog output.
The wiring configuration within the headset jack of a VoIP/digital phone often differs, depending on the manufacturer. The BLU-HIF comes with two cables whose 4P4C RJ-22 connectors are compatible with the two most common wiring configurations found in the headset jack of VoIP/digital phones.
The additional 2.5mm jack facilitates connection of two-way communication devices such as cellular phones to the Soundweb London device. This gives the end user the advantage of having an alternate communication path to the outside world, which is particularly useful as a backup to the main phone system.
|Connector||Telephone Headset: RJ-22 or 2.5mm TRS headset jack|
|Input||1 Balanced Combicon|
|Output||1 Balanced Combicon|
|Chassis||Rugged Metal, Surface/Under-Table Mountable|
Sound Technology’s professional audio products are specified and supplied by leading resellers and integrators throughout the country, together with a select number of trade distributors.
If you are a trade customer please call Sound Technology Ltd on +44(0)1462 480000 for more information or call one of our sub-distributors listed below.
General Purpose I/O Expander
RRP ex VAT: £2,040.00
The Soundweb London BLU-GPX is a network-controlled GPIO expander which facilitates the cost-effective addition of Control Inputs, Logic Outputs, and Relays to systems requiring extra analog control/interfacing capability. The BLU-GPX features the same rich palette of Logic Objects found in other Soundweb London devices, two PoE-enabled Ethernet ports for communications and primary power, a 12VDC power connector for secondary power, a RS-232 port for compatibility with serial devices, a bank of user-configurable front panel LEDs, a user-configurable front panel LCD, a user-configurable piezo…View details
BLU link card for Soundcraft Si Series
RRP ex VAT: £700.00
The BSS BLU-SI card is a 32 x 32 interface between Soundcraft Si Series consoles and the BLU Link digital audio bus. The card allows connection to a wide variety of Harman products equipped with a BLU Link interface such as BSS London BLU 800, dbx® PMC or Crown® PIP-BLU interfaces amongst others.
BLU Link is a low latency, fault tolerant digital audio bus of 256 channels which using standard CAT 5e cabling gives a distance of 100m between compatible BLU Link enabled devices.View details
RRP ex VAT: £105.00
The BSS Audio 1U Rack-Mount Kit allows up to two half-rack Soundweb London devicesâ€”BLU-BIB and BLU-BOB1â€”to be mounted on a shelf occupying a single rack space. The 1U Rack-Mount Kit can accommodate one BLU-BIB device, one BLU-BOB1 device, two BLU-BIB devices, two BLU-BOB1 devices, or one of each device. With each device offering eight channels of analog I/O expansion, the 1U Rack-Mount Kit allows for higher I/O density (16 channels) in a single rack space. For instances in which only one I/O expander is mounted, the included half-rack blanking plate can be used to fill the…View details
Fiber Optic Media Converter
RRP ex VAT: £2,550.00
The MC-1 is a Gigabit Media Converter which provides transport up to 10 km (6.2 miles) using 1310nm single mode fiber cable. In use, an MC-1 will be utilized on each end of a two conductor single mode fiber optic cable deployed between two equipment rack locations. The MC-1 is supplied with a wall mount bracket and external power supply. The MC-1 utilizes automatic link restoration which re-establishes network links between two MC-1 devices should a connected Soundweb London device be disconnected and reconnected to the network. This eliminates the need to reset the MC-1 after patching or…View details
We have placed cookies on your device to help make this website better.
You can use this tool to change your cookie settings. Otherwise, we’ll assume you’re OK to continue.