AKG C414 XLII/ST Stereo Pair

Overview

Matched stereo pair of C414 XLII microphones

Powering: 48 V phantom power to IEC 61938
Type	One Inch Large Diaphragm Pressure Gradient Microphone
Polar patterns	nine, selectable
Open-circuit sensitivity	23 mV/Pa (-33 dBV ± 0.5 dB)
Frequency range	20 to 20,000 Hz
Impedance	≤ 200 ohms
Recommended load impedance	≥ 2200 ohms
Bass cut filter slopes	12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Pre-attenuation pads	-6 dB, 112 dB, -18 dB (selectable)
Equivalent noise level to IEC 60268-4	20 dB (0 dB pre-attenuation)
Equivalent noise level to IEC 60268-4 (A-weighted)	6 dB-A (0 dB pre-attenuation)
Signal/noise ratio re 1 Pa (A-weighted)	88 dB
Max. SPL for 0.5% THD	200/400/800/1600 Pa = 140/146/152/158 dB SPL (0/-6/-12/-18 dB pre-attenuation)
Dynamic range	134 dB min.
Max. output level	5 V rms (+14 dBV)
Environment: temperature	-10°C to +60°C
R.H.	95% (+20°C); 85% (+60°C)
Current consumption: approx. 4.5 mA
Connector: 3-pin XLR (pin 2 hot)
Dimensions: 50 x 38 x 160 mm / 2 x 1.5 x 6.3 in.
Net weight: 300 g / 10.6 oz.